Effects of Performance on Mechanical properties of Sawdust/Carbon Fibre Reinforced Polymer matrix Hybrid Composites

ABSTRACT. Short carbon fibre (CF) and sawdust (SD) were dispersed in to the epoxy (EP) matrix in order to manufacture polymer hybrid composites using compression moulding technique. The mechanical properties of flexural properties of hybrid, compression moulded, chopped CF/SD/epoxy composites have been investigated taking into account the effect of hybridization by these two fillers. Hybridization with small amounts of SD makes these CF composites more suitable for technical applications. The simultaneous compounding of epoxy with two fillers was done to obtain a hybrid composite. This system is expected to have considerable mechanical properties, good surface finish and low cost. It has been found that the tensile properties of filled epoxy were higher than unfilled epoxy. By incorporating up to 30% (by mass) Carbon fiber (CF) and 10% sawdust (SD) namely S 3 sample flexural strength was increased by 12.5%. Thus it is shown that the durability of CF/SD filled epoxy composites can be enhanced by hybridization with small amount of CF. The hybrid effects of the flexural strength and modulus were studied by the rule of hybrid mixture

An Update of Lectins from Marine Organisms: Characterization, Extraction Methodology, and Potential Biofunctional Applications

Lectins are a unique group of nonimmune carbohydrate-binding proteins or glycopro-teins that exhibit specific and reversible carbohydrate-binding activity in a non-catalytic manner. Lectins have diverse sources and are classified according to their origins, such as plant lectins, animal lectins, and fish lectins. Marine organisms including fish, crustaceans, and mollusks produce a myriad of lectins, including rhamnose binding lectins (RBL), fucose-binding lectins (FTL), mannose-binding lectin, galectins, galactose binding lectins, and C-type lectins. The widely used method of extracting lectins from marine samples is a simple two-step process employing a polar salt solution and purification by column chromatography. Lectins exert several immunomodulatory functions, including pathogen recognition, inflammatory reactions, participating in various hemocyte functions (e.g., agglutination), phagocytic reactions, among others. Lectins can also control cell prolifer-ation, protein folding, RNA splicing, and trafficking of molecules. Due to their reported biological and pharmaceutical activities, lectins have attracted the attention of scientists and industries (i.e., food, biomedical, and pharmaceutical industries). Therefore, this review aims to update current information on lectins from marine organisms, their characterization, extraction, and biofunctionali-ties. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Ural Federal University, UrFUThe author O.N.K is grateful to the “Priority 2030” program of the Ural Federal University for support

Internal and External Flow over Laser-Textured Superhydrophobic Polytetrafluoroethylene (PTFE)

In this work, internal and external flows over superhydrophobic (SH) polytetrafluoroethylene (PTFE) were studied. The SH surface was fabricated by a one-step femtosecond laser micromachining process. The drag reduction ability of the textured surface was studied experimentally both in microscale and macroscale internal flows. The slip length, which indicates drag reduction in fluid flow, was determined in microscale fluid flow with a cone-and-plate rheometer, whereas a pressure channel setup was used for macroscale flow experiments. The textured PTFE surface reduced drag in both experiments yielding comparable slip lengths. Moreover, the experimentally obtained slip lengths correspond well to the result obtained applying a semianalytical model, which considers the solid fraction of the textured surface. In addition to the internal flow studies, we fabricated SH PTFE spheres to test their drag reduction abilities in an external flow experiment, where the terminal velocities of the falling spheres were measured. These experiments were conducted at three different Reynolds numbers in both viscous and inertial flow regimes with pure glycerol, a 30% glycerol solution, and water. Surprisingly, the drag on the SH spheres was higher than the measured drag on the non-SH spheres. We hypothesize that the increase in form drag outweighs the decrease in friction drag on the SH sphere. Thus, the overall drag increased. These experiments demonstrate that a superhydrophobic surface that reduces drag in internal flow might not reduce drag in external flow

Colored Poly(vinyl chloride) by Femtosecond Laser Machining

Colored poly­(vinyl chloride) (PVC) was fabricated by femtosecond laser micromachining without the addition of chemical colorants, eliminating the concern of leaching dyes and pigments. We determined that the changes in surface chemistry and surface topography both contribute to the observed yellow, brown, and black color formation. X-ray photoelectron spectroscopy (XPS) on the machined samples showed that conjugated double bonds are liable for the yellow and brown colors, whereas the presence of oxidized carbon and surface topography contribute to the black color. Fourier transform infrared spectroscopy (FTIR) indicated that laser irradiation altered the material’s properties only near the surface, which left the bulk properties unaltered. Furthermore, chemical resistance tests showed that some of the samples were able to withstand the influence of aggressive chemicals and their color did not fade. Finally, we showed that the fabrication of colored PVC highly depends on its ablation energy threshold which is affected by the laser pulse duration and wavelength

Characterization of the Antibacterial Activity of an SiO2 Nanoparticular Coating to Prevent Bacterial Contamination in Blood Products

Technological innovations and quality control processes within blood supply organizations have significantly improved blood safety for both donors and recipients. Nevertheless, the risk of transfusion-transmitted infection remains non-negligible. Applying a nanoparticular, antibacterial coating at the surface of medical devices is a promising strategy to prevent the spread of infections. In this study, we characterized the antibacterial activity of an SiO2 nanoparticular coating (i.e., the “Medical Antibacterial and Antiadhesive Coating” [MAAC]) applied on relevant polymeric materials (PM) used in the biomedical field. Electron microscopy revealed a smoother surface for the MAAC-treated PM compared to the reference, suggesting antiadhesive properties. The antibacterial activity was tested against selected Gram-positive and Gram-negative bacteria in accordance with ISO 22196. Bacterial growth was significantly reduced for the MAAC-treated PVC, plasticized PVC, polyurethane and silicone (90–99.999%) in which antibacterial activity of ≥1 log reduction was reached for all bacterial strains tested. Cytotoxicity was evaluated following ISO 10993-5 guidelines and L929 cell viability was calculated at ≥90% in the presence of MAAC. This study demonstrates that the MAAC could prevent bacterial contamination as demonstrated by the ISO 22196 tests, while further work needs to be done to improve the coating processability and effectiveness of more complex matrices